Pni TCM Bedienungsanleitung PDF herunterladen (Seite 28)

PNI Sensor Corporation DOC#1014688 r06

TCM User Manual – July 2013 Page 23

6.2.3 Changing Modules

Once a connection has been made, TCM Studio will recall the last settings. If a different

module is used, click the <Connect> button once the new module is attached. This will

reestablish a connection, assuming the module baud rate is unchanged.

6.3 Configuration Tab

Note: No settings will be changed in the module until the <SAVE> button has been selected.

6.3.1 Mounting Options

TCM Studio supports 16 mounting orientations, as illustrated previously in Figure 4-2.

The descriptions in TCM Studio are slightly different from those shown in Figure 4-2,

and the relationship between the two sets of descriptions is given below.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 76 77

Keine Kommentare

Pni TCM Bedienungsanleitung Seite 28