Pni TCM Bedienungsanleitung PDF herunterladen (Seite 16)

PNI Sensor Corporation DOC#1014688 r06

TCM User Manual – July 2013 Page 11

4.3.2 Mounting Orientation

The TCM can be mounted in various orientations, as shown for the TCM XB in Figure

4-2. All reference points are based on the white silk-screened arrow on the top side of the

board. The orientation should be programmed in the TCM using TCM Studio or the

kSetConfig command. The default orientation is “STD 0°”.

Note: TCM XB is shown. The Z axis sensor and the connector are on the module’s top surface,

regardless of model.

Figure 4-2: Mounting Orientations

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 76 77

Keine Kommentare

Pni TCM Bedienungsanleitung Seite 16